Ford 2810 Loader problem

Discuss your favorite brand and how to fix it.
dcara
Rancher
Rancher
Posts: 965
Joined: Thu Jul 01, 2004 7:58 am
Location: East of Dallas Texas

Ford 2810 Loader problem

Postby dcara » Tue Jul 10, 2018 6:12 pm

87 model Ford 2810 with 7410 loader. 3 Point still works fine. Have already replaced filter and checked fluid level. Loader lift has gotten slower each time I use it for past 5 times or so and now has almost stopped lifting and rolling in. It still drops and rolls out/dumps. When I replaced filter I found a chewed up 1 inch long piece of red rubber about the size of a worm. Figured it was an o-ring from somewhere. But where. Should I just dive into the joystick?
0 x
Mooovin on
Doug

wbvs58
GURU
GURU
Posts: 3800
Joined: Sun Mar 20, 2011 12:45 am
Location: S.E. Queensland, Australia

Re: Ford 2810 Loader problem

Postby wbvs58 » Wed Jul 11, 2018 4:13 am

On my older Kubota the suction line that goes in and out of the filter before going into the pump is only sealed by O rings. I just had to replace them recently as they were letting a bit of air in.

Ken
0 x

User avatar
cfpinz
GURU
GURU
Posts: 5509
Joined: Thu Sep 08, 2005 12:11 pm
Location: Virginia

Re: Ford 2810 Loader problem

Postby cfpinz » Wed Jul 11, 2018 6:17 am

If the joystick supply comes from the rear remotes and they happen to be the deluxe style, make sure the aluminum cartridge inserts haven't started to unscrew and back out.
0 x
God is great, beer is good, and people are crazy.


Return to “Trucks, Tractors and Machinery”

Who is online

Users browsing this forum: 12251HD and 1 guest