Pay no attention to this post

Anything that doesn't fit in the other boards.
ez14
GURU
GURU
Posts: 1011
Joined: Fri Sep 26, 2014 11:23 am
Location: west michigan

Re: Pay no attention to this post

Postby ez14 » Fri Jan 15, 2016 8:48 pm

fenceman wrote:
ez14 wrote:
fenceman wrote:Image

What happend to that


I was feeling a little cranky. Hit that one to hard. :cowboy:

greybeard wrote:FM-If you'll run over it a 2nd time with the bush hog, that will probably straighten it right back out and you can use it again.


Actually d6 got it. It does look like a bush hog got it though. You've obviously hit a few. :nod:

you need to learn to control your self ruining posts like that must cost you some money
0 x
with your shield or on it

User avatar
JMJ Farms
GURU
GURU
Posts: 2574
Joined: Tue Dec 01, 2015 8:51 pm
Location: Middle Georgia

Re: Pay no attention to this post

Postby JMJ Farms » Fri Jan 15, 2016 9:21 pm

Trying to help you get to 5 pages bigfoot
0 x
"You don't have to be a genius to be successful. Just surround yourself with smart people. And LISTEN to them" C.M.

User avatar
greybeard
Mentor
Mentor
Posts: 14476
Joined: Thu Jul 05, 2012 5:51 pm
Location: Cleveland Tx

Re: Pay no attention to this post

Postby greybeard » Sun Jan 17, 2016 12:36 am

fenceman wrote:
greybeard wrote:FM-If you'll run over it a 2nd time with the bush hog, that will probably straighten it right back out and you can use it again.


Actually d6 got it. It does look like a bush hog got it though. You've obviously hit a few. :nod:

A few--you can always tell the old cheap ones--they break in half.
(Worst thing was running over a steel belted radial with about 30' of 3/8" chain tied on it--I thought a giant something had grabbed that mower and was trying to shake it off the 3 point. I would have never thought it physically possible to get both blades INSIDE a tire and it be doubled up to boot.)
0 x
"For evil to flourish, all that is required is for good men to do nothing" Burke

It ain't easy being a used cow salesman.

User avatar
JMJ Farms
GURU
GURU
Posts: 2574
Joined: Tue Dec 01, 2015 8:51 pm
Location: Middle Georgia

Re: Pay no attention to this post

Postby JMJ Farms » Sun Jan 17, 2016 9:18 am

greybeard wrote:
fenceman wrote:
greybeard wrote:FM-If you'll run over it a 2nd time with the bush hog, that will probably straighten it right back out and you can use it again.


Actually d6 got it. It does look like a bush hog got it though. You've obviously hit a few. :nod:

A few--you can always tell the old cheap ones--they break in half.
(Worst thing was running over a steel belted radial with about 30' of 3/8" chain tied on it--I thought a giant something had grabbed that mower and was trying to shake it off the 3 point. I would have never thought it physically possible to get both blades INSIDE a tire and it be doubled up to boot.)


That'd make you have to clean the seat of your pants, huh GB? :lol2: sounds like something I'd do.
0 x
"You don't have to be a genius to be successful. Just surround yourself with smart people. And LISTEN to them" C.M.

ez14
GURU
GURU
Posts: 1011
Joined: Fri Sep 26, 2014 11:23 am
Location: west michigan

Re: Pay no attention to this post

Postby ez14 » Mon Jan 18, 2016 12:43 pm

JMJ Farms wrote:Trying to help you get to 5 pages bigfoot

:D
0 x
with your shield or on it

cowboy43
GURU
GURU
Posts: 1782
Joined: Sat Mar 07, 2009 7:36 am
Location: Central Texas

Re: Pay no attention to this post

Postby cowboy43 » Sat Jan 23, 2016 7:39 pm

I am paying attention to your post, what you gonna do about it? :cboy:
0 x

User avatar
JMJ Farms
GURU
GURU
Posts: 2574
Joined: Tue Dec 01, 2015 8:51 pm
Location: Middle Georgia

Re: Pay no attention to this post

Postby JMJ Farms » Sat Jan 23, 2016 7:45 pm

cowboy43 wrote:I am paying attention to your post, what you gonna do about it? :cboy:


He's busy right now. Slick just spotted fenceman wandering across his pasture dressed as a caveman and he's outside turning the dogs loose :lol2: :lol2: :lol2:
0 x
"You don't have to be a genius to be successful. Just surround yourself with smart people. And LISTEN to them" C.M.

User avatar
slick4591
GURU
GURU
Posts: 8479
Joined: Thu Mar 31, 2011 6:58 pm
Location: Farmersville, Texas
Contact:

Re: Pay no attention to this post

Postby slick4591 » Sat Jan 23, 2016 8:03 pm

cowboy43 wrote:I am paying attention to your post, what you gonna do about it? :cboy:


Image
0 x
"If the mountain were smooth you couldn't climb it." ~ unknown

User avatar
regolith
GURU
GURU
Posts: 2716
Joined: Sat Jan 17, 2009 9:58 pm
Location: New Zealand

Re: Pay no attention to this post

Postby regolith » Sat Jan 23, 2016 8:33 pm

slick4591 wrote:
Image


This post badly needs a shave
0 x
Stepping backwards and progress are not mutually exclusive

ez14
GURU
GURU
Posts: 1011
Joined: Fri Sep 26, 2014 11:23 am
Location: west michigan

Re: Pay no attention to this post

Postby ez14 » Sat Jan 23, 2016 10:31 pm

regolith wrote:
slick4591 wrote:
Image


This post badly needs a shave

No it needs a beard
0 x
with your shield or on it

cowboy43
GURU
GURU
Posts: 1782
Joined: Sat Mar 07, 2009 7:36 am
Location: Central Texas

Re: Pay no attention to this post

Postby cowboy43 » Sun Jan 24, 2016 9:09 am

The low temp was 36 the high to be 70 sunny skies :banana:
0 x

User avatar
HDRider
GURU
GURU
Posts: 4265
Joined: Mon Jul 25, 2011 9:25 am
Location: NE Arkansas

Re: Pay no attention to this post

Postby HDRider » Sun Jan 24, 2016 2:28 pm

greybeard wrote:
fenceman wrote:
greybeard wrote:FM-If you'll run over it a 2nd time with the bush hog, that will probably straighten it right back out and you can use it again.


Actually d6 got it. It does look like a bush hog got it though. You've obviously hit a few. :nod:

A few--you can always tell the old cheap ones--they break in half.
(Worst thing was running over a steel belted radial with about 30' of 3/8" chain tied on it--I thought a giant something had grabbed that mower and was trying to shake it off the 3 point. I would have never thought it physically possible to get both blades INSIDE a tire and it be doubled up to boot.)

How in the world did a tire tied to a chain get in your path?
0 x
bball wrote: "The juice wasn't worth the squeeze."
Dun said, "You gotta be flexible. Do whatever you have to do for the best results within your limitations."

User avatar
JMJ Farms
GURU
GURU
Posts: 2574
Joined: Tue Dec 01, 2015 8:51 pm
Location: Middle Georgia

Re: Pay no attention to this post

Postby JMJ Farms » Sun Jan 24, 2016 2:31 pm

HDRider wrote:
greybeard wrote:
fenceman wrote:
Actually d6 got it. It does look like a bush hog got it though. You've obviously hit a few. :nod:

A few--you can always tell the old cheap ones--they break in half.
(Worst thing was running over a steel belted radial with about 30' of 3/8" chain tied on it--I thought a giant something had grabbed that mower and was trying to shake it off the 3 point. I would have never thought it physically possible to get both blades INSIDE a tire and it be doubled up to boot.)

How in the world did a tire tied to a chain get in your path?


$hit happens :lol2: :lol2: :lol2: Regularly at my farm.
0 x
"You don't have to be a genius to be successful. Just surround yourself with smart people. And LISTEN to them" C.M.

ez14
GURU
GURU
Posts: 1011
Joined: Fri Sep 26, 2014 11:23 am
Location: west michigan

Re: Pay no attention to this post

Postby ez14 » Sun Jan 24, 2016 10:34 pm

cowboy43 wrote:The low temp was 36 the high to be 70 sunny skies :banana:

Im jealous
0 x
with your shield or on it

cowboy43
GURU
GURU
Posts: 1782
Joined: Sat Mar 07, 2009 7:36 am
Location: Central Texas

Re: Pay no attention to this post

Postby cowboy43 » Mon Jan 25, 2016 2:58 pm

Low this morning 45 high to be 72
0 x


Return to “Every Thing Else Board”

Who is online

Users browsing this forum: No registered users and 2 guests