stall display/dividers

Discuss the ins and outs of the showring.
User avatar
tobytonya
Cowhand
Cowhand
Posts: 30
Joined: Tue Feb 12, 2008 3:55 pm

stall display/dividers

Postby tobytonya » Wed Jul 02, 2008 3:11 pm

Has anyone seen stall display/dividers made out of wood? Something like Sullivans sells, but made from wood, not metal. If you've seen some or you've made some how were they put together-2X4 or 4X4's, plywood or OSB, ETC...
Thought it would be easier to make from wood, since I don't have a wire welder. Any suggestion? Anyone looking to sell their old stall display?
0 x

ND Angus
Cowhand
Cowhand
Posts: 99
Joined: Tue Jan 08, 2008 9:15 pm
Location: North Dakota

Re: stall display/dividers

Postby ND Angus » Tue Jul 08, 2008 6:57 pm

I should have read your post a few days ago. I just sold my steel stall bought an aluminum one. my steel one was only 2 years old and I got $300 for it, it was a full cage one.
0 x

htrc
Cowhand
Cowhand
Posts: 70
Joined: Mon Nov 05, 2007 11:40 am
Location: missouri

Re: stall display/dividers

Postby htrc » Tue Jul 08, 2008 9:41 pm

I made a set out of 2x2's and hog panels.They lasted over 10 years,I rebuild them out of 1" square tubing and the same hog panels.
I made them with the same angle and look as the sullivan panels then painted them,hog panels and all. They looked good enough for my kids to win Herdsmanship a time or two. If you need a drawing of them I can try and send you one.
0 x

User avatar
Braunviehboy
Cowhand
Cowhand
Posts: 35
Joined: Wed May 02, 2007 3:40 pm
Location: Dumas,Ar
Contact:

Re: stall display/dividers

Postby Braunviehboy » Wed Jul 09, 2008 2:06 am

I was just saying that I needed some dividers and was thinking about making them out of wood. I would like to see any plans that I could get an idea off of.
0 x

CPL
GURU
GURU
Posts: 1041
Joined: Sat Apr 28, 2007 4:13 pm

Re: stall display/dividers

Postby CPL » Wed Jul 09, 2008 5:16 am

I am in the middle of my 4-H fair and there are a few there made out of wood. It can be done, and you can paint your farm name on it. I will try to get pictures of them before the week is over. It doesn't look like they'd be too hard to make.
0 x

User avatar
tobytonya
Cowhand
Cowhand
Posts: 30
Joined: Tue Feb 12, 2008 3:55 pm

Re: stall display/dividers

Postby tobytonya » Fri Jul 11, 2008 7:34 am

Thanks for the replies. I think I will try HTRC plan since I have hog panels laying around. I priced everything and it will cost me under $90 to make 4 panels using treated lumber and metal brackets for the corners. If I would have used steel it was going to cost $370-foot of steel tubing was $2.21-I can buy an 8 foot 2X4 for that price. If anyone would like pictures of the panels, let me know. I can take some when I'm done.
0 x

MAT
Beginner
Beginner
Posts: 1
Joined: Thu Aug 03, 2017 11:53 pm

Re: stall display/dividers

Postby MAT » Fri Aug 04, 2017 12:24 am

Does anyone have pics of homemade dividers they are willing to share? I have measurements and have seen commercial type ones but am trying to save a few bucks and make them. Thanks
0 x

User avatar
farmboy80
Cowhand
Cowhand
Posts: 88
Joined: Tue Oct 11, 2016 7:41 pm
Location: southwest MO.

Re: stall display/dividers

Postby farmboy80 » Mon Sep 04, 2017 10:20 pm

Interested in see in any pictures you have of them. Please and thank you!
0 x


Return to “Show Board”

Who is online

Users browsing this forum: No registered users and 2 guests