Dang weather

The place to start if you are new!
Post Reply
Dave
GURU
GURU
Posts: 8748
Joined: Mon Jul 12, 2004 1:35 pm
Location: Baker County, Oregon
Been thanked: 880 times

Dang weather

Post by Dave » Wed Jul 08, 2020 6:40 pm

Well I cut the last of the poles I need this morning. Now I just have 84 poles and 6 gates to get hung. I need it to be 30 degrees cooler or me to be 30 years younger. But I am still 68 and it is going to be in the 90's with 100 degrees predicted for Saturday. I picture myself in my recliner in front of the AC by about 9:00 every morning.
Could be worse. On Friday it is suppose to be well into the 90's. Cows are supposed to get moved off the BLM up behind the house. Most of those cows there belong to the neighbor with broken ribs. So 5 other neighbors are going to gather and move about 190 cows and calves. A 190 pairs on 3,000 acres of serious up and down country is not going to be easy on men, horses, or dogs. A project for those younger than me. It will be a good day to be a senior citizen.

Image

Image



User avatar
MurraysMutts
Rancher
Rancher
Posts: 891
Joined: Tue Dec 17, 2019 12:51 pm
Location: N. Central boonies, Oklahoma
Has thanked: 219 times
Been thanked: 344 times

Re: Dang weather

Post by MurraysMutts » Wed Jul 08, 2020 9:48 pm

Dang!
Nice poles!
Ehem.... rails!

Just curious. How to u attach them?
Crossbred for high bread vinegar....

Dave
GURU
GURU
Posts: 8748
Joined: Mon Jul 12, 2004 1:35 pm
Location: Baker County, Oregon
Been thanked: 880 times

Re: Dang weather

Post by Dave » Wed Jul 08, 2020 10:41 pm

MurraysMutts wrote:
Wed Jul 08, 2020 9:48 pm
Dang!
Nice poles!
Ehem.... rails!

Just curious. How to u attach them?
Lag screws. I use 3/8 screws of varying length depending on the size of the pole. I have 8", 10", and 12". I want at least 4 inches in the post. I use an impact wrench to put them in. Nice thing about using lag screws is if needed I can take them out easily.

User avatar
Rafter S
GURU
GURU
Posts: 4304
Joined: Tue Sep 17, 2013 11:13 am
Location: Grimes County, TX
Has thanked: 103 times
Been thanked: 123 times

Re: Dang weather

Post by Rafter S » Thu Jul 09, 2020 6:38 am

I'm surprised those lag screws don't snap off right under the head. Do you buy a stronger grade?
Life is too short to drink cheap beer or dance with ugly women.

User avatar
Dsth
Cowhand
Cowhand
Posts: 182
Joined: Wed Jan 02, 2019 1:33 pm
Location: eastern Iowa
Has thanked: 41 times
Been thanked: 78 times

Re: Dang weather

Post by Dsth » Thu Jul 09, 2020 7:57 am

:cowboy: At 68, it is nice that you still have the good health and energy to start a project like that Dave. As long as you are not in a big hurry to get it done, just take your time and work on it when you feel comfortable out there. I just bought my first battery operated impact at Christmas and wonder why I didn't buy one years ago. It sure saves a lot of work over the old socket and ratchet. I'm thinking the younger generation is looking forward to rounding up all the neighbors cattle for him. In my younger years, I seemed to look forward to getting those types of jobs done simply because I knew that not everyone else could do it. Enjoy your time in the recliner in front of the AC.

Dave
GURU
GURU
Posts: 8748
Joined: Mon Jul 12, 2004 1:35 pm
Location: Baker County, Oregon
Been thanked: 880 times

Re: Dang weather

Post by Dave » Thu Jul 09, 2020 8:48 am

Rafter S wrote:
Thu Jul 09, 2020 6:38 am
I'm surprised those lag screws don't snap off right under the head. Do you buy a stronger grade?
Just 50 pound boxes off the internet. Not up grade at all. I snapped off a fair number. Wrote the company to complain about the quality. They explained better installation. I drill a deeper pilot hole and lubricate the screw using a bar of soap. Drove 100's of them since I last broke one.

User avatar
MurraysMutts
Rancher
Rancher
Posts: 891
Joined: Tue Dec 17, 2019 12:51 pm
Location: N. Central boonies, Oklahoma
Has thanked: 219 times
Been thanked: 344 times

Re: Dang weather

Post by MurraysMutts » Thu Jul 09, 2020 9:25 am

Very nice. That's a great tip!
I was curious if lag bolts would work well or not.
Crossbred for high bread vinegar....

Dave
GURU
GURU
Posts: 8748
Joined: Mon Jul 12, 2004 1:35 pm
Location: Baker County, Oregon
Been thanked: 880 times

Re: Dang weather

Post by Dave » Thu Jul 09, 2020 3:32 pm

Dsth wrote:
Thu Jul 09, 2020 7:57 am
:cowboy: I'm thinking the younger generation is looking forward to rounding up all the neighbors cattle for him. In my younger years, I seemed to look forward to getting those types of jobs done simply because I knew that not everyone else could do it.
I don't think it will be anything anyone is looking forward to. Of the 5 doing this 2 are over 50. There are 2 in their mid 30's and one who is early 20's. Cowboying around here can be dangerous. One of the guys had a horse fall on him a couple years ago. Broke his jaw in that wreck. Last week another guy had a horse fall with him. Broke his leg, nose, and boggered up his shoulder. You haven't been here long enough to have seen pictures of this country.
Looking down at my house from the back of my place. 2,000 foot elevation difference in less than a mile.
Image
This is part of the area they have to gather cows at. Lots of serious up and down.
Image

User avatar
TexasBred
Mentor
Mentor
Posts: 30414
Joined: Wed Aug 15, 2007 1:18 pm
Location: Heart of Texas
Has thanked: 466 times
Been thanked: 321 times

Re: Dang weather

Post by TexasBred » Thu Jul 09, 2020 5:16 pm

Set up about half way between start and finish line and declare yourself in charge of beer and baloney. Don't forget to bring a good comfortable lawn chair. Let'em work their way to you.
“Tell me what you brag about and I'll tell you what you lack”

Spanish Proverb

User avatar
1982vett
GURU
GURU
Posts: 9196
Joined: Sun Feb 03, 2008 7:57 pm
Location: Central Texas
Has thanked: 179 times
Been thanked: 253 times

Re: Dang weather

Post by 1982vett » Thu Jul 09, 2020 5:16 pm

Guess we really don’t grasp how fortunate some of us are when we are able to drop a tailgate on a truck or mule and rattle a bag of cubes to get cattle to follow (race) us back to the pens. :cboy:
Aug 7, 2019 22:51GMT -5 the illustrious potentate said:
Because you have the freedom to say what you think, doesn't always mean that you should.

The right to speak freely is not free of consequences.

Dave
GURU
GURU
Posts: 8748
Joined: Mon Jul 12, 2004 1:35 pm
Location: Baker County, Oregon
Been thanked: 880 times

Re: Dang weather

Post by Dave » Thu Jul 09, 2020 7:29 pm

I saw an ad for a ranch a little south of here that described the place as horse crippling, dog killing country...... But everyone knows it is a bed of roses running cows on that BLM ground.

User avatar
Dsth
Cowhand
Cowhand
Posts: 182
Joined: Wed Jan 02, 2019 1:33 pm
Location: eastern Iowa
Has thanked: 41 times
Been thanked: 78 times

Re: Dang weather

Post by Dsth » Fri Jul 10, 2020 7:08 am

Dave wrote:
Thu Jul 09, 2020 3:32 pm
Dsth wrote:
Thu Jul 09, 2020 7:57 am
:cowboy: I'm thinking the younger generation is looking forward to rounding up all the neighbors cattle for him. In my younger years, I seemed to look forward to getting those types of jobs done simply because I knew that not everyone else could do it.
I don't think it will be anything anyone is looking forward to. Of the 5 doing this 2 are over 50. There are 2 in their mid 30's and one who is early 20's. Cowboying around here can be dangerous. One of the guys had a horse fall on him a couple years ago. Broke his jaw in that wreck. Last week another guy had a horse fall with him. Broke his leg, nose, and boggered up his shoulder. You haven't been here long enough to have seen pictures of this country.
Looking down at my house from the back of my place. 2,000 foot elevation difference in less than a mile.
Image
This is part of the area they have to gather cows at. Lots of serious up and down.
Image
Looks like pretty rough country. I did not expect it to be that bad. Hope everyone returns home safe and no animals get injured during the round up.

Post Reply