Weaning work

Cattle problems.
User avatar
gizmom
GURU
GURU
Posts: 2858
Joined: Mon Oct 12, 2009 2:23 pm
Location: Molino Florida
Contact:

Weaning work

Postby gizmom » Thu Apr 12, 2018 7:51 am

It is hard to believe that weaning time is here, it just doesn’t seem like it was that long ago we were weighing and tagging these babies. The boss has scheduled the work for next Tuesday and Wednesday first run through the chute they will be wormed, bovi shield gold FP 5VL5 and Ultrabac 7/Somubac. In addition to PI test DNA card weight, hip height and steer out 50% of the bull calves. We also tattoo this time so a couple of busy days. The bull calves that get steered will also get a tetanus shot. I don’t have to work that hard just do paperwork oh one more item the calves get their EID tag. We will booster in three weeks then fence line wean, after about two weeks the calves are split into male female groups the bull calves are loaded up and hauled to the home place for development. I guess we just need to get ur done.

Gizmom
0 x
Respect give it to get it!

User avatar
True Grit Farms
GURU
GURU
Posts: 7758
Joined: Mon Jan 04, 2016 5:29 pm
Location: Middle Georgia

Re: Weaning work

Postby True Grit Farms » Thu Apr 12, 2018 8:32 am

You have great working facilities, and the record keeper isn't bad either. Be careful and enjoy yourself.
0 x
If we'd of know this we'd of picked our own cotton.

User avatar
midTN_Brangusman
Rancher
Rancher
Posts: 603
Joined: Fri Apr 17, 2015 2:18 pm
Location: Unionville, TN

Re: Weaning work

Postby midTN_Brangusman » Wed Apr 18, 2018 2:56 am

gizmom wrote:It is hard to believe that weaning time is here, it just doesn’t seem like it was that long ago we were weighing and tagging these babies. The boss has scheduled the work for next Tuesday and Wednesday first run through the chute they will be wormed, bovi shield gold FP 5VL5 and Ultrabac 7/Somubac. In addition to PI test DNA card weight, hip height and steer out 50% of the bull calves. We also tattoo this time so a couple of busy days. The bull calves that get steered will also get a tetanus shot. I don’t have to work that hard just do paperwork oh one more item the calves get their EID tag. We will booster in three weeks then fence line wean, after about two weeks the calves are split into male female groups the bull calves are loaded up and hauled to the home place for development. I guess we just need to get ur done.

Gizmom



Debbie what do you guys use a a culling factor? I assume its weaning weight performance.
0 x

User avatar
gizmom
GURU
GURU
Posts: 2858
Joined: Mon Oct 12, 2009 2:23 pm
Location: Molino Florida
Contact:

Re: Weaning work

Postby gizmom » Wed Apr 18, 2018 8:57 pm

Mid T

It is a combination of things, performance weighs heavy into selection. We had 67 bull calves this year after today we have 37 In three weeks we will cut 10 to 12 more from the keeper list. We steered some mighty nice calves over the past two days the ones that stayed a bull should be dang good ones. I have a spread sheet that I used, I plug in the information at birth, birthdate, birthweight, sire and dam. First run through the chute I plug in the date worked and weight and the formula gives me the ADG from birth to weaning. A calf that isn’t gaining close to or better than 3 pounds a day is steered. If a calf has been treated for any type illness he gets to be a steer. If his dam has less than stellar feet he gets cut. If a calf isn’t structurally correct he gets to be a steer. If a calf is born at the end of the calving season he gets to be a steer. Our final goal is to have 20 to 25 bulls to develop but we want them to be really good. We worked a grand total of 106 calves the past two days it will take me another couple days to get the data entered. Of the 106 calves I would say three were just duds so their performance will not only earn the calf a trip to the sale barn but we will send it’s mamma as well. No since keeping an employee that doesn’t get the job done. It has been a busy couple of days.

Gizmom
0 x
Respect give it to get it!

User avatar
True Grit Farms
GURU
GURU
Posts: 7758
Joined: Mon Jan 04, 2016 5:29 pm
Location: Middle Georgia

Re: Weaning work

Postby True Grit Farms » Wed Apr 18, 2018 9:31 pm

gizmom wrote:Mid T

It is a combination of things, performance weighs heavy into selection. We had 67 bull calves this year after today we have 37 In three weeks we will cut 10 to 12 more from the keeper list. We steered some mighty nice calves over the past two days the ones that stayed a bull should be dang good ones. I have a spread sheet that I used, I plug in the information at birth, birthdate, birthweight, sire and dam. First run through the chute I plug in the date worked and weight and the formula gives me the ADG from birth to weaning. A calf that isn’t gaining close to or better than 3 pounds a day is steered. If a calf has been treated for any type illness he gets to be a steer. If his dam has less than stellar feet he gets cut. If a calf isn’t structurally correct he gets to be a steer. If a calf is born at the end of the calving season he gets to be a steer. Our final goal is to have 20 to 25 bulls to develop but we want them to be really good. We worked a grand total of 106 calves the past two days it will take me another couple days to get the data entered. Of the 106 calves I would say three were just duds so their performance will not only earn the calf a trip to the sale barn but we will send it’s mamma as well. No since keeping an employee that doesn’t get the job done. It has been a busy couple of days.

Gizmom


That's how you have happy and repeat bull buyers.
1 x
If we'd of know this we'd of picked our own cotton.

Coosh71
Trail Boss
Trail Boss
Posts: 299
Joined: Sun May 01, 2016 8:32 am
Location: Texas Panhandle

Re: Weaning work

Postby Coosh71 » Fri Apr 20, 2018 12:49 pm

Wow... That's great. I agree it will bring you repeat customers for sure. Good luck with the keepers!
0 x

User avatar
midTN_Brangusman
Rancher
Rancher
Posts: 603
Joined: Fri Apr 17, 2015 2:18 pm
Location: Unionville, TN

Re: Weaning work

Postby midTN_Brangusman » Fri Apr 20, 2018 1:13 pm

gizmom wrote:Mid T

It is a combination of things, performance weighs heavy into selection. We had 67 bull calves this year after today we have 37 In three weeks we will cut 10 to 12 more from the keeper list. We steered some mighty nice calves over the past two days the ones that stayed a bull should be dang good ones. I have a spread sheet that I used, I plug in the information at birth, birthdate, birthweight, sire and dam. First run through the chute I plug in the date worked and weight and the formula gives me the ADG from birth to weaning. A calf that isn’t gaining close to or better than 3 pounds a day is steered. If a calf has been treated for any type illness he gets to be a steer. If his dam has less than stellar feet he gets cut. If a calf isn’t structurally correct he gets to be a steer. If a calf is born at the end of the calving season he gets to be a steer. Our final goal is to have 20 to 25 bulls to develop but we want them to be really good. We worked a grand total of 106 calves the past two days it will take me another couple days to get the data entered. Of the 106 calves I would say three were just duds so their performance will not only earn the calf a trip to the sale barn but we will send it’s mamma as well. No since keeping an employee that doesn’t get the job done. It has been a busy couple of days.

Gizmom



Debbie thank you for the info. Will use this to help us in our culling as well.
0 x


Return to “Health & Nutrition”

Who is online

Users browsing this forum: Google [Bot] and 4 guests