Replacing Old Ritchie Waterer

Share knowledge or ideas about doing anything and everything.
Post Reply
JeffK-MN
Cowhand
Cowhand
Posts: 148
Joined: Fri Apr 12, 2013 9:12 pm

Replacing Old Ritchie Waterer

Post by JeffK-MN » Sat Sep 16, 2017 7:02 pm

I have a old Ritchie 3E waterer with painted bowls.
I got a newer 3E with stainless steel bowls that has hardly been used.
I have made sure that it will fit right on the old concrete pad. The old waterer has a 10" culvert that needs a light bulb hanging down in the winter to stop the ice from building out from the side and freezing the water line.
I was going to put a thermal tube in but the culvert is to small. I have electricity in it also.
If you have any tips or tricks that would help. Thanks Jeff



User avatar
Aaron
GURU
GURU
Posts: 4565
Joined: Mon Apr 25, 2005 11:09 pm
Location: Stratton, ON, Canada
Has thanked: 59 times
Been thanked: 94 times
Contact:

Re: Replacing Old Ritchie Waterer

Post by Aaron » Sat Sep 16, 2017 9:39 pm

This would be my suggestion. I should try it even on my own Ritchie.

http://www.homedepot.com/p/4-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD4X300/100396934
cor durum laborem

JeffK-MN
Cowhand
Cowhand
Posts: 148
Joined: Fri Apr 12, 2013 9:12 pm

Re: Replacing Old Ritchie Waterer

Post by JeffK-MN » Sun Sep 17, 2017 12:36 pm

Thanks Aaron that is a great idea. Jeff

User avatar
farmboy80
Trail Boss
Trail Boss
Posts: 205
Joined: Tue Oct 11, 2016 7:41 pm
Location: southwest MO.
Has thanked: 1 time

Re: Replacing Old Ritchie Waterer

Post by farmboy80 » Wed Sep 20, 2017 7:19 am

I'd suggest getting some heat tape. You plug it in and forget about it! It has a built in thermostat and you ziptie it or duck tape it along you water line. They sell it in all different lengths. Should be able to find it at most any hardware store.
God, Family, Friends, Cattle. The order of the last two is debatable!

JeffK-MN
Cowhand
Cowhand
Posts: 148
Joined: Fri Apr 12, 2013 9:12 pm

Re: Replacing Old Ritchie Waterer

Post by JeffK-MN » Wed Sep 20, 2017 12:08 pm

Thanks farmboy80 if I would have installed it the heat tape would have been put on. But I have to work with what is there. If I have trouble with the duct tube I can drop a heat tape down inside it. Jeff

User avatar
Boot Jack Bulls
Rancher
Rancher
Posts: 944
Joined: Fri Jun 05, 2015 7:03 pm
Location: NW WI
Has thanked: 3 times
Been thanked: 15 times

Re: Replacing Old Ritchie Waterer

Post by Boot Jack Bulls » Wed Sep 20, 2017 4:55 pm

farmboy80 wrote:I'd suggest getting some heat tape. You plug it in and forget about it! It has a built in thermostat and you ziptie it or duck tape it along you water line. They sell it in all different lengths. Should be able to find it at most any hardware store.

This is what we do! We have a couple different brands of waterer, all with the light bulb deal. In the fall every year, we put a new heat tape on each (and any hydrants), replace light bulbs, and put fresh gravel fill around them (a little gap with cause the cold are to leak in and freeze the whole deal up).
Boot Jack Cattle LLC & Boot Jack Boers

Post Reply