New Post Driver

Share knowledge or ideas about doing anything and everything.
Post Reply
fence_it
Trail Boss
Trail Boss
Posts: 229
Joined: Sun Sep 10, 2017 7:31 pm
Location: way out west
Been thanked: 1 time

Re: New Post Driver

Post by fence_it » Wed Jun 20, 2018 4:17 pm

We run diesel 3/4 tons with airbags. They are comfortable to tow up to 20k with. I really dislike dual wheels. Find them to be an all around PITA in most cases.


The bitterness of poor quality remains long after the sweetness of low price is forgotten.

User avatar
greybeard
Mentor
Mentor
Posts: 18832
Joined: Thu Jul 05, 2012 5:51 pm
Location: Cleveland Tx
Has thanked: 121 times
Been thanked: 549 times

Re: New Post Driver

Post by greybeard » Thu Jun 28, 2018 11:59 pm

GB is still doing it old school..

Image
"For evil to flourish, all that is required is for good men to do nothing" Burke
Power corrupts. Absolute power corrupts absolutely.
It ain't easy being a used cow salesman.

User avatar
1982vett
GURU
GURU
Posts: 8900
Joined: Sun Feb 03, 2008 7:57 pm
Location: Central Texas
Has thanked: 74 times
Been thanked: 137 times

Re: New Post Driver

Post by 1982vett » Fri Jun 29, 2018 7:35 am

:shock: Oh my gosh..... Wood handles to boot...... :???:

TrueLy brutal!
Aug 7, 2019 22:51GMT -5 the illustrious potentate said:
Because you have the freedom to say what you think, doesn't always mean that you should.

The right to speak freely is not free of consequences.

User avatar
greybeard
Mentor
Mentor
Posts: 18832
Joined: Thu Jul 05, 2012 5:51 pm
Location: Cleveland Tx
Has thanked: 121 times
Been thanked: 549 times

Re: New Post Driver

Post by greybeard » Fri Jun 29, 2018 7:54 am

I do have a 3pt auger but refuse to hook it up to drill just one hole and it only drills to a little over 3ft anyway.
"For evil to flourish, all that is required is for good men to do nothing" Burke
Power corrupts. Absolute power corrupts absolutely.
It ain't easy being a used cow salesman.

User avatar
1982vett
GURU
GURU
Posts: 8900
Joined: Sun Feb 03, 2008 7:57 pm
Location: Central Texas
Has thanked: 74 times
Been thanked: 137 times

Re: New Post Driver

Post by 1982vett » Fri Jun 29, 2018 9:10 am

I’m not sure what the circumstance would be for me to use wooden handled diggers. I’m betting the metal set I have is near a hundred years old. The looked well used when I was a kid.

I have played with a set of wooden handled diggers but I need metal to get a hole dug...and it can’t be the light cheaper metal one either. Knock my knuckles together and I’m done. :D
Aug 7, 2019 22:51GMT -5 the illustrious potentate said:
Because you have the freedom to say what you think, doesn't always mean that you should.

The right to speak freely is not free of consequences.

User avatar
greybeard
Mentor
Mentor
Posts: 18832
Joined: Thu Jul 05, 2012 5:51 pm
Location: Cleveland Tx
Has thanked: 121 times
Been thanked: 549 times

Re: New Post Driver

Post by greybeard » Fri Jun 29, 2018 9:44 pm

I have some metal ones too and do use them once I get down deeper since they will dig deeper without widening the top of the hole, but man, they are heavy...pulling them out of a deep hole with a load of damp clay in them wears on me.
"For evil to flourish, all that is required is for good men to do nothing" Burke
Power corrupts. Absolute power corrupts absolutely.
It ain't easy being a used cow salesman.

fence_it
Trail Boss
Trail Boss
Posts: 229
Joined: Sun Sep 10, 2017 7:31 pm
Location: way out west
Been thanked: 1 time

Re: New Post Driver

Post by fence_it » Sat Jun 30, 2018 5:37 pm

I consider myself pretty skilled with a set of post hole diggers and a rock bar. I like the wood handles, never used steel ones, seems like it would be heavy. The fiberglass ones are the worst, crack way too easy. Thankfully I don't have to use them too often.

When we need a good amount of holes dug its time to bring out the Belltec. 3pt auger with hydraulic downpressure, made to auger through rock. The bits have bullet teeth on them. The auger will lift the tractor off the ground and put the weight of it on the bit while drilling.
Image
The bitterness of poor quality remains long after the sweetness of low price is forgotten.

User avatar
1982vett
GURU
GURU
Posts: 8900
Joined: Sun Feb 03, 2008 7:57 pm
Location: Central Texas
Has thanked: 74 times
Been thanked: 137 times

Re: New Post Driver

Post by 1982vett » Sat Jun 30, 2018 6:02 pm

I like the metal....when I send them downhole I want them to get a bite. They don’t tend to bounce like the wooden ones do.
Aug 7, 2019 22:51GMT -5 the illustrious potentate said:
Because you have the freedom to say what you think, doesn't always mean that you should.

The right to speak freely is not free of consequences.

Lucky
Rancher
Rancher
Posts: 788
Joined: Sun Feb 11, 2018 12:11 am
Location: TX
Has thanked: 51 times
Been thanked: 130 times

Re: New Post Driver

Post by Lucky » Tue Jul 10, 2018 7:22 pm

I’ve got a Danuser T3 post driver and a set of augers for the skid steer, don’t guess I’ll ever need a set of hand diggers again. Serious business everyone that sets a post should look at the T3 Driver it’s simple and cost efficient. I paid for it building a set of corrals. It drives up to 3” pipe so if you do wood braces might be out of luck.

User avatar
JMJ Farms
GURU
GURU
Posts: 4498
Joined: Tue Dec 01, 2015 7:51 pm
Location: Middle Georgia
Has thanked: 288 times
Been thanked: 307 times

Re: New Post Driver

Post by JMJ Farms » Tue Jul 10, 2018 7:53 pm

greybeard wrote:GB is still doing it old school..

Image


GB, you ever tried to use a set of them hole diggers that work backwards? I see the local EMC here uses them.
Until we remember that the left wing and the right wing belong to the same bird and we come together as a nation then this country is in for more turmoil - Jogeephus

User avatar
greybeard
Mentor
Mentor
Posts: 18832
Joined: Thu Jul 05, 2012 5:51 pm
Location: Cleveland Tx
Has thanked: 121 times
Been thanked: 549 times

Re: New Post Driver

Post by greybeard » Thu Jul 12, 2018 3:05 am

JMJ Farms wrote:
greybeard wrote:GB is still doing it old school..

Image


GB, you ever tried to use a set of them hole diggers that work backwards? I see the local EMC here uses them.


Yes I have and I have a set of them. They weigh about 20lbs too. One of the few tools I ever bought from TSC that worked good and held up, but I gotta tell ya... after 49 years of digging a hole with regular posthole diggers, and jabbing them down in the hole with the handles closed together, then using them double jointed ones where you jabbed into the holes with the handles apart sure got me confused if I wasn't careful. Even now, if I start the hole with regular diggers and switch over to the other ones after I get deeper, I have to think each time I start down with em.
Mine are a different brand, and the pivot points are a little different on mine, but this is how they work..more or less:
Image

I also have a set of the old split handle lineman diggers, with handles about 8' long. I can't really explain it, but the handles are half round and will slide right past each other and you can dig a lot deeper and wider bottomed hole without opening the top of the hole up much. I had to quit using them tho...the old wooden handles were splintering and tearing my hands up.

Looks like they still make them tho they ain't cheap:
https://www.jharlen.com/p-12637-oshkosh ... igger.aspx
"For evil to flourish, all that is required is for good men to do nothing" Burke
Power corrupts. Absolute power corrupts absolutely.
It ain't easy being a used cow salesman.

User avatar
JMJ Farms
GURU
GURU
Posts: 4498
Joined: Tue Dec 01, 2015 7:51 pm
Location: Middle Georgia
Has thanked: 288 times
Been thanked: 307 times

Re: New Post Driver

Post by JMJ Farms » Thu Jul 12, 2018 6:34 am

greybeard wrote:
JMJ Farms wrote:
greybeard wrote:GB is still doing it old school..

Image


GB, you ever tried to use a set of them hole diggers that work backwards? I see the local EMC here uses them.


Yes I have and I have a set of them. They weigh about 20lbs too. One of the few tools I ever bought from TSC that worked good and held up, but I gotta tell ya... after 49 years of digging a hole with regular posthole diggers, and jabbing them down in the hole with the handles closed together, then using them double jointed ones where you jabbed into the holes with the handles apart sure got me confused if I wasn't careful. Even now, if I start the hole with regular diggers and switch over to the other ones after I get deeper, I have to think each time I start down with em.
Mine are a different brand, and the pivot points are a little different on mine, but this is how they work..more or less:
Image

I also have a set of the old split handle lineman diggers, with handles about 8' long. I can't really explain it, but the handles are half round and will slide right past each other and you can dig a lot deeper and wider bottomed hole without opening the top of the hole up much. I had to quit using them tho...the old wooden handles were splintering and tearing my hands up.

Looks like they still make them tho they ain't cheap:
https://www.jharlen.com/p-12637-oshkosh ... igger.aspx


Don’t feel bad. I tried a pair one time while helping a friend and had to think each time as well. Hard to reprogram your brain after years of using regular hole diggers. That’s my one and only experience with them but some folks swear by them. I guess most everything has its place and purpose.
Until we remember that the left wing and the right wing belong to the same bird and we come together as a nation then this country is in for more turmoil - Jogeephus

Farm Fence Solutions
GURU
GURU
Posts: 2008
Joined: Thu Dec 15, 2016 2:22 pm
Has thanked: 70 times
Been thanked: 41 times

Re: New Post Driver

Post by Farm Fence Solutions » Mon Jul 30, 2018 8:48 am

Image

Image
Image

Image
Image

Image
"Opportunity is missed by most people because it is dressed in overalls and looks like work." Thomas Edison

fence_it
Trail Boss
Trail Boss
Posts: 229
Joined: Sun Sep 10, 2017 7:31 pm
Location: way out west
Been thanked: 1 time

Re: New Post Driver

Post by fence_it » Mon Jul 30, 2018 5:48 pm

Farm Fence Solutions wrote:Image

Image
Image

Image
Image

Image


All I can say is wow. You've got the dream setup there.
The bitterness of poor quality remains long after the sweetness of low price is forgotten.

ddd75
GURU
GURU
Posts: 2433
Joined: Thu Feb 19, 2015 9:47 am
Location: KY
Has thanked: 11 times
Been thanked: 16 times

Re: New Post Driver

Post by ddd75 » Mon Jul 30, 2018 7:20 pm

lookin good man!

how's she poundin?

Post Reply