Ramp traction

Discuss your favorite brand and how to fix it.
callmefence
GURU
GURU
Posts: 5073
Joined: Mon Mar 07, 2016 10:36 pm
Location: Fencemans place...central Texas

Ramp traction

Postby callmefence » Mon Jan 14, 2019 8:34 am

My skid steer with it's steel tracks on does not like trailer ramps. I bought 8 foot ramps for the dump trailer. If you raise it about 20 " it will usually load ok.
The ramps are extremely heavy. I don't want to bolt wood to them.
Just bought new 35 foot float with the wide ramps. 5' dove with 5 ramps. It hates them, if I can't find a ditch or a terrace to even things out I have to use the winch on the truck to help it on. When paint gets worn off it'll probably be better idk.There's rubber matting I guess.
Any ingenious ideas on this problem??
0 x
If it ain't tight , It ain't right.




You can all go to he// . I'll go to Texas.
David Crockett

User avatar
True Grit Farms
GURU
GURU
Posts: 8105
Joined: Mon Jan 04, 2016 5:29 pm
Location: Middle Georgia

Re: Ramp traction

Postby True Grit Farms » Mon Jan 14, 2019 8:43 am

Weld solid square 3/4 x 3/4 on the ramp spaced every foot.
1 x
If we'd of know this we'd of picked our own cotton.

Atimm693
Trail Boss
Trail Boss
Posts: 383
Joined: Fri Oct 14, 2016 8:44 am

Re: Ramp traction

Postby Atimm693 » Mon Jan 14, 2019 9:37 am

You can weld on strips of rebar. Had to do that to our excavator trailer, we were having the same problem.
0 x

ez14.
GURU
GURU
Posts: 1157
Joined: Mon Jan 30, 2017 10:42 pm
Location: west MI

Re: Ramp traction

Postby ez14. » Mon Jan 14, 2019 9:54 am

callmefence wrote: I don't want to bolt wood to them.
because you don't want to drill through them or?
0 x

User avatar
jltrent
GURU
GURU
Posts: 2496
Joined: Sun Aug 25, 2013 9:04 pm

Re: Ramp traction

Postby jltrent » Mon Jan 14, 2019 10:35 am

Himac Aluminium Loading Ramps are tested and certified for easy loading and unloading of earthmoving machinery onto your trailer or truck.

https://www.himac.com.au/products/skid- ... ding-ramps

Image
0 x

User avatar
TennesseeTuxedo
Mentor
Mentor
Posts: 12052
Joined: Sat Jul 09, 2011 7:49 pm
Location: Live in Franklin, TN farm in Warsaw, KY

Re: Ramp traction

Postby TennesseeTuxedo » Mon Jan 14, 2019 11:33 am

That’s pretty slick.
0 x
You're not paranoid, they really are out to get you!

callmefence
GURU
GURU
Posts: 5073
Joined: Mon Mar 07, 2016 10:36 pm
Location: Fencemans place...central Texas

Re: Ramp traction

Postby callmefence » Mon Jan 14, 2019 11:56 am

Wood on both the dovetail and the ramp is going to prevent the Rams from closing. Plus the it's a constant maintenance issue. I sure don't think aluminum ramps are going to hold up to steel tracks. We also haul a track loader at times.
We mocked up highgrits idea about a hour ago. As long as we space the bars where they don't land on each other. The ramps will close. We're going to try it. I think it will work on the dump trailer ramps as well.

Thank you.



Image
0 x
If it ain't tight , It ain't right.




You can all go to he// . I'll go to Texas.
David Crockett

callmefence
GURU
GURU
Posts: 5073
Joined: Mon Mar 07, 2016 10:36 pm
Location: Fencemans place...central Texas

Re: Ramp traction

Postby callmefence » Mon Jan 14, 2019 12:02 pm

callmefence wrote:Wood on both the dovetail and the ramp is going to prevent the Rams from closing. Plus the it's a constant maintenance issue. I sure don't think aluminum ramps are going to hold up to steel tracks. We also haul a track loader at times.
We mocked up highgrits idea about a hour ago. As long as we space the bars where they don't land on each other. The ramps will close. We're going to try it. I think it will work on the dump trailer ramps as well.

Thank you.



Image


Edit. This trailer is the worst of the other three. While the wide ramps are nice. I think the center piece of steel. Runs up the center of each ramp keeps the track from getting a bite on the angle iron
0 x
If it ain't tight , It ain't right.




You can all go to he// . I'll go to Texas.
David Crockett

User avatar
True Grit Farms
GURU
GURU
Posts: 8105
Joined: Mon Jan 04, 2016 5:29 pm
Location: Middle Georgia

Re: Ramp traction

Postby True Grit Farms » Mon Jan 14, 2019 12:48 pm

callmefence wrote:
callmefence wrote:Wood on both the dovetail and the ramp is going to prevent the Rams from closing. Plus the it's a constant maintenance issue. I sure don't think aluminum ramps are going to hold up to steel tracks. We also haul a track loader at times.
We mocked up highgrits idea about a hour ago. As long as we space the bars where they don't land on each other. The ramps will close. We're going to try it. I think it will work on the dump trailer ramps as well.

Thank you.



Image


Edit. This trailer is the worst of the other three. While the wide ramps are nice. I think the center piece of steel. Runs up the center of each ramp keeps the track from getting a bite on the angle iron


It makes no sense to me why all the trailer manufacturers have the angle turned up. If they'd turn the angle ridge down it would have twice the surface to grab on to.
1 x
If we'd of know this we'd of picked our own cotton.


Return to “Trucks, Tractors and Machinery”

Who is online

Users browsing this forum: Google [Bot] and 0 guests