gibb keys

[Carlos D.]

I think their called gibb keys--anyway there those big keys we find on shafts that has a lip on them to drive them out but there never is enough room to swing a hammer---any one know an easy way to get them out

carl

 

[dj]

you have 26 days and 13 hrs left to buy a removal tool here
http://wantitnow.ebay.com.au/Gibb-Key-R ... 0003349166

or you might find a helpful suggestion here
http://www.steamengine.com.au/ic/faq/keyremoval.html

 

[Cabo]

Carlos, if you are talking about the keys like those used on a Heston baler, the best way that I have found is to tap the pulley fairly hard. This loosens up the keys so thay you can pry them out with an injector bar. Good luck

 

[hayray]

I think their called gibb keys--anyway there those big keys we find on shafts that has a lip on them to drive them out but there never is enough room to swing a hammer---any one know an easy way to get them out

carl

my Hesston baler describes in the manual how to remove the gib key.